齿形角英语怎么说及英文翻译

⑴ 请帮忙翻译英语！

QQ不好！
哈哈...这是我第一次使用联系的东西...一切是中国... ...是的，当然这一版切让我疯狂
当时这些华权人的事情... ...什么的唯一原因，但我想使用联系是保持联系我亲爱的朋友，莉莉尹从我国。她就像一个小屁股洞， eventhough她已经创建了一个帐户上的MSN ，她要去的迹象在1000年后... [仇恨ü使...],和那一天，我想这将是非常非常严重下雨...哈哈...但不管怎么说，我使用的联系现在，尝试处理这些东西，但它付出了血的话，我不能完全理解...他妈的！ 。
好吧，如果有人想和我交朋友，欢迎您，但有一件事我必须让你知道，我不知道中文非常好，只要一点点，因此，如果您仍然希望成为我的朋友，您需要知道的英语和用英语跟我，这不是一个大问题，对不对？
我叫安妮[当然这不是我的真实姓名，这是我的英文名称] ，我来自越南[岳南] 。现在我住在美利坚合众国（梅国）和我要上大学的Sep/2009 。
确定...我想这就够了

⑵ 1——20的英文翻译

1-20的英文翻译及读音如下：

1.one [wQn]

2. two [tu:]

3. three [Wri:]

4. four [fC:]

5. five [faiv]

6. six [siks]

7. seven ['sevEn]

8. eight[eIt]

9. nine [nain]

10.ten [ten]

11.eleven [i'levEn]

12.twelve [twelv]

13.thirteen ['WE:'ti:n]

14.fourteen ['fC:'ti:n]

15.fifteen ['fif'ti:n]

16.sixteen ['siks'ti:n]

17 .seveteen ['sevEn'ti:n]

18 .eighteen ['eI'ti:n]

19.nineteen ['nain'ti:n]

20.twenty ['twenti]

(2)齿形角英语怎么说及英文翻译扩展阅读

一、one释义

cardinal number：一；一个

pron：那个人；那个东西；那种人；一个人；任何人

复数：ones

例句：

1.Beginning at Act one, Scene one.

从第一幕第一场开始。

2.One unit is equivalent to one glass of wine.

一个单位等于一杯酒。

相关词组

1.one of…之一;其中之一

2.one day一天;一日

3.one year一年

4.one hand一方面

5.one thing一回事;一件事;某一事物

二、two释义

cardinal number两；两个

复数：twos

例句：

1.Item two statute books ... item two drums.

此外还有两部法令汇编… 还有两面鼓。

2.Two of its toes point forward and two point back.

它的两个脚指头朝着前面,两个脚指头朝着后面。

相关词组

1.two thirds三分之二

2.two hundred二百;200;两百

3.two more再来两个;又两个;多两个

4.two times两次;两倍;两遍

⑶ 求助英语翻译

谢谢确认回复， 因为中国春节假期是2月9日到2月21日，所以2.3日和2.8日的出货发票请在2.8号之内前发给我，谢容谢
Thank you for confirming your reply, because the Chinese New Year holiday is from February 9th to February 21st, so please send me the invoices for shipments on the 2.3th and 2.8th before the 2.8th, thank you

⑷ 英语高手帮忙翻译下！有加分咯。在线等答案。

在分析了直齿圆柱齿轮的力量,假设在一个单一的平面。在这门课中回,我们将研究齿轮答,有三个维度。这样做的原因,得出的结论是,斜齿圆柱齿轮的齿并非平行轴的旋转。在这个案例中,锥齿轮,转动轴不是彼此平行。也有其他的原因,因为我们要学习。

⑸ 求英语高手翻译，谢谢啦！！

Recer is applied in prime mover and work machine independent transmission device between. With compact structure,
It is of high transmission efficiency, transfer movement characteristics such as accurate and reliable. The speed recer design process, need to do lots of analysis, calculation and drawing work and thus FeiGong time-consuming manual design, the design efficiency is low.
At present, the computer aided design and manufacturing technology (CAD/CAM) has been widely used in various fields, instrial and agricultural proction in scientific computing, engineering design plays a huge role. Using CAXA AUTOCAD, such as cad software for the recer is also received a very good effect.
Based on the introction of computer aided design three-dimensional modeling principle, method and steps of basis, based on
With solid features modelling function, parameterized, a single database software platform, Pro/e
Combined with cylindrical gears rection gear structure and function characteristics, analyses the integration three-dimensional modeling design.
From the solid modelling design Angle, for its box seats and the box cover bearing with noodles, against a hole
Buy high request, presents the main parts (cabinet) integration design modelling methods. Based on
Cylindrical gear recer all parts structure shape detailed analyses category, according to various parts structure
Shape, respectively for Pro/e in corresponding entity attributes modelling function, completed the cylindrical gears decreases
Speed machine main parts three-dimensional molding design. Using Pro/e assembly functions are zero
Assembly, proced assembly explosion diagram, created box seat engineering drawings.
Through the research of cylindrical gear recer, realizing the rapid, accurate modeling and assembly design. income
3d entity model appeared intuitively and realistically and the detailed structure of main parts speed recer and shapes,
Facilitate undertake interference, effectively save the proct design time, improve the design efficiency for slowing down
The parametric design for laid a foundation.
Keywords: recer; Modeling methods; Solid modeling design; CAD; Pro/e

⑹ 长方形、正方形、圆形、三角形、菱形、五角星分别用英语怎么说

长方形：rectangle，读音：英['rektæŋɡl]；美['rektæŋɡl]

正方形：square，读音：英[skweə(r)]；美[skwer]

圆形：circle，读音：英['sɜːkl]；美['sɜːrkl]

三角形：triangle，读音：英['traɪæŋɡl]；美['traɪæŋɡl]

菱形：diamond，读音：英['daɪəmənd]；美['daɪəmənd]

五角星：five-pointed star，读音：英 [faɪv ˈpɔɪntɪd stɑː(r)]；美 [faɪv ˈpɔɪntɪd stɑːr]

(6)齿形角英语怎么说及英文翻译扩展阅读

其他英语的形状

Equilateral triangle– 3 sides, 3 equal angles, 3 sides of equal length 等边三角形 - 3个边，3个相等的角度，3个相等长度的边；

Right-angled triangle– 3 sides, 2 sides of equal length, 1 right angle 直角三角形 - 3个边，2个相等长度，1个直角；

Scalene triangle– 3 sides of different length, 3 different angles 不等边三角形- 3不同长度,3个不同的角度；

Oval– 1 curved side, different distance across at any side (diameter) 椭圆形 - 1个弯曲侧面，任何一侧的不同距离（直径）；

Pentagon– 5 sides, the sum of the internal angles is 540o 五角大楼 - 五面，内角之和为540度；

Isosceles triangle– 3 sides, 2 sides of equal length, 2 equal angles 等腰三角形 - 3个边，2个相等长度的边，2个相等的角度；

Rhombus– 2 pairs of parallel sides, 4 sides of equal length, also called a diamond 菱形- 2双平行,4边长度相等,也称为钻石；

Octagon– 8 sides, the sum of the internal angles is 1080o 八边形 - 8边，内角之和为1080度。

⑺ 英语翻译中文

这是一个齿轮零件的工艺图纸。懂五金加工的人翻译起来轻松准确些。

1、表面渗碳和淬，洛氏硬度56 - 63, 碳膜厚度0.6-1，有效硬化深度（按照国标GB9450）≥0.5，中心洛氏硬度27-45，可焊性符合STDQC / T262；
2、齿轮表面没有漏焊裂缝、毛刺和尖角，烧灼伤和叠层；
3、采取齿轮外径作为齿轮精度测量基准;
4、轴向齿形槽宽度0.1 -0.3；
5、齿轮残余磁性≤15高斯；
6、图中未标注尺寸的倒角半径为R3

希望我的回答可以帮到你。

⑻ 齿轮英文参数翻译

第一行 模数
2 齿数
3 齿形角
4 标准参考齿廓
5 变位系数
6 精度
7 齿距累积公差内
8 齿形公差
9 齿向公差
10 公法线容长度
11 公法线长度上齿数
12 齿轮副中心距
13 辊径
14 齿顶直径
15 齿根直径
16 分度圆直径

另外还有
h 全齿高
h*a 齿顶高系数
Fβ 齿向公差
F'i切向综合公差
f'i 齿切向综合公差
ff 齿形公差
Fr 齿圈径向跳动公差
k 跨测齿数
mn 法向模数
。。。

⑼ 求各类螺丝名称的英文翻译

中文品名
Description in Chinese 英文品名
Desciption in English
圆锥销 Taper pins
圆柱销 Parallel pins
开槽圆柱头螺钉 Slotted cheese head screws
开槽盘头螺钉 Slotted pan head screws
单耳止动垫圈 Tab washers
开口销 Split cooter pins
开槽半沉头木螺钉 Slotted raised csk head wood screws
开槽半圆头木螺钉 Slotted round head wood screws
开槽沉头木螺钉 Slotted countersunk head wood screws
平垫 Plain washers
平垫（带倒角） Mediun washers
平垫 Plain washers
重型弹垫 Spring lock washers,tang ends
标准弹垫 Spring lock washers,square ends
鞍形弹垫 Single coil spring lock washers
弹簧止动垫圈 Curved spring washers
波形弹垫 Wave spring washers
T型方颈螺栓 T-head blots with square neck
T型双接头螺栓 T-head bolts with double nip
螺纹圆锥销 Taper pins with threaded end
T型头螺栓 T-head bolts
蝶型螺母（美制） Wing nuts America form
蝶型螺母（德制） Wing nuts germany form
蝶型螺母（美制） Wing screws America form
蝶型螺母（德制） Wing screws germany form
圆球型盖型螺母 Ball knobs
开槽带孔球面
圆柱头蚴钉 Slotted capstan screws
开槽长圆柱端
紧定螺钉 Slotted set srews with full dog point
开槽平端
紧定螺钉（半牙） Slotted set srews with chamfered end
小六角特薄细牙
螺母 Pip nuts with thread
外舌止动垫圈 External tap
小垫圈
(用于圆柱头螺钉) Washers for cheese head screws
方斜垫圈（U型） Square taper washers for
U-section
方斜垫圈（I型） Square taper washers for
I-sections
方垫圈 Square washers
开槽凹端紧定螺钉 Slotted set with cup point
六角薄螺母 Hexagon thin nuts
细牙六角薄螺母 Hexagon thin nuts
木螺钉专用垫圈 Rounds washers for wood constructions
密封帽 Sealing caps,push-in type
活节螺栓B型 Eye bolts form B
内舌止动垫圈 Internal tab washers
双耳止动垫圈 Washers with two taps
滚花高头螺钉 Knurled thumb screws with collar
开槽滚花高头螺钉 Slotted knurled thumb screws with collar
滚花高螺母 Knurled thumb nuts with collar
滚花薄螺母 Knurled thumb thin nuts
锁紧垫圈 Sealing washers
轴用弹性垫圈 Retaining rings for shafts(external),circlips
孔用弹性垫圈 Retaining rings for bores(internal),circlips
方头带垫螺栓 Square head bolts with collar
方头圆柱底端螺栓 Square head bolts with half dog point
方头带垫关圆底端
螺栓 Square head bolts with collar,half dog point
T型槽螺母 T-slot nuts
单头螺柱 Single end studs
地脚螺栓 Masonry bolts
带槽圆螺母 Slotted round nuts
端面带孔圆螺母 Round nuts with drilled holes in one face
开槽平端紧定螺钉 Slotted set screws with flat point
开槽锥端紧定螺钉 Slotted set screws with cone point
六角螺母 Hexagon nuts
方螺母-C Square nuts
六角头螺钉 Hexagon screws
六角头圆柱端
紧定螺钉 Hexagon set screws with full dog point
薄型方螺母-B Square nuts without bevel
(pressed nuts)
六角头木螺钉 Hexgon head wood screw
(coach screws)
吊环螺钉 Lifting eye bolts
吊环螺母 Lifting eye nuts
圆锥型槽销 Grooved pins,taper grooved
圆锥型槽销
（半槽） Grooved pins,taper grooved half length
平行槽销
（带倒角） Grooved pins,parallel grooved full length
前端凹槽槽销 Grooved pins,reverve grooved half length
中部凹槽槽销 Grooved pins,center grooved
圆头槽销 Grooved pins with round head
沉头槽销 Grooved pins with countersunk head
六角螺母棒 Turnuckles(center parts),made out of hexagon bar
花蓝螺栓 Turnuckles with eye bolt and hook bolt
弹性圆柱销 Spring pins,heavy type
组合式盖型螺母 Hexagon domed cap nuts
开槽圆螺母
(配合沟头扳手) Slotted round nuts for hook spammer
圆螺母（带插销孔） Round nuts with set holes
盘型弹簧垫圈 Disc springs
喉箍 Hose clamps
润滑油嘴
（旋扭头） Lubricating nipples,button head
管夹 Shackles for conilts
U型螺栓 Stirrup bolts(U-bolts)
球面垫圈 Spherical washers,conical seats
圆柱销 Parallel pins
厚六角螺母 Hexagon nuts,1.5d
厚六角法兰面
螺母 Hexagon nuts,1.5d with collar
长六角螺母 Hexagon nuts,3d
外齿锁紧垫圈 External teeth lock washers
内齿锁紧垫圈 Internal teeth lock washers
外锯齿锁紧垫圈 External teeth serrated lock washers
内锯齿锁紧垫圈 Internal teeth serrated lock washers
开口挡圈 Retaining rings for shafts(E-rings),circlips
平键（A型） Parallel keys(form A)
半圆键 Woodruff keys
嵌环（支撑环） Thimbles
机器螺钉和垫圈
组合件 Screws and washers assemblies
自攻螺钉和垫圈
组合件 Tapping screws and washer assemblies
薄型带孔
内六角圆柱螺钉 Hexagon cocket head cap screws with hole,low head
大六角头螺栓 Hexagon head bolts with large head
(friction grip nolts)
大六角螺母 Hexagon nuts with large wideth across flat
(friction grip nuts)
大垫圈 Round washers for friction grip bolts
楔型方垫圈 Spuare taper washers for friction grip bolts on T-
六角法兰面螺母 Hexagon flange nuts
全金属六角锁紧螺母（2型） Prevailing torque type hexagon nuts,all metallic nuts
轻型弹性圆柱销 Spring pins,light type
重型弹性圆柱
销用垫圈 Washers for bolts with heavy type spring pinss
ISO公制螺纹螺钉（多种头型） Thread forming screws for ISO-metric thread
自攻自钻螺钉
（多种头型） Self-drilling tapping screws
开槽切削螺纹螺钉（多种头型） Thread cutting screws
十字槽切削螺纹螺钉（多种头型） Thread cutting screws cross recess
T型四爪螺母 Tee nuts with pronge
钢结构用六角头螺栓连接副 Hexagon head fitted bolts for steel structures
开槽盘头
自攻螺钉 Pan head tapping screws with slot
开槽沉头
自攻螺钉 countersunk flat head tapping screws with slot
开槽半沉头
自攻螺钉 Raised sountersunk oval head tapping screws with slot
六角头自攻螺钉 Hexagon tapping screws
圆柱头螺钉用
弹簧垫圈 Spring lock washers for screws with cylindrical heads
十字槽盘头
自攻螺攻 Pan head tapping screws with cross recessed
十字槽沉头
自攻螺攻 Countersunk flat head tapping screws with cross recessed
十字槽半沉头
自攻螺攻 Raised countersunk oval head tapping screws with cross
薄型内六角
圆柱头螺钉 Hexagon socket head cap screws with,reced head
十字槽盘头螺钉 Pan head screws with cross recessed
钢结构用垫圈 Washers for steel structures
钢结构用
六角头螺栓 Hexagon head bolts for steel structures
内六角沉头螺钉 Hexagon socket coutersunk head screws
轴用钢丝挡圈 Roundwire snap rings for shafts
十字槽半沉头
木螺钉 Cross recessed raised countersunk head wood screws
十字槽圆头
木螺钉 Cross recessed round head wood screws
十字槽沉头
木螺钉 Cross recessed countersunk head wood screws
螺纹护套
(普通、自锁等) Ciol inserts,coarse,fine thread,silf locking
大外径垫圈 Washers,outside diameter appro.3d
弹簧卡子 sping cotter for a bolt
平板螺栓 Belting bolts
(elevator bolts)
干壁钉
（墙板钉） Dry wall screws
环型螺母 Lifting nuts(eye nuts)
圆螺母用止退
垫圈 Tab washer for slotted round nuts

⑽ 齿轮英文怎么说

很简单啊
Mole 模数
Teeth number 齿数
tooth profile 齿形角（也叫压力角）
standard reference profile 标准齿形
shifting coefficient 变位系数
accuracy grade 精度等级版
total cumulative pitch tolerance 齿距累积总公差
tolerance on tooth profile error 齿形公差（权也叫齿廓偏差）
helix deviation 螺旋线公差（旧标准也叫齿向公差）
base tangent length 公法线长度
teeth number in base tangent length 跨齿数
over-rolls measurement 量棒距
roll diameter 量棒直径
tip diameter 齿顶圆直径
root diameter 齿根圆直径
pitch diameter 分度圆直径