熔敷速度英语怎么说及英文翻译

⑴ 英语翻译，速度！

战马
战马是一部伟大的战争电影，讲述了一个关于一匹马和一个年轻人的有趣版故事。权1912年，一个来自德文郡叫做Aibert Narracott 的年轻人见证一匹小马的出生和成长，Aibert 的父亲用所有的钱买了一匹马，Aibert叫这马Joey，并且花了很长时间来训练，Albert 和Joey成了好朋友，不想分离，但是两年以后，战争爆发， Joey 被卖到兵营，变成了战马，在战场上面对了很多的困难，为了把自己的马找回来，Albert 也参军，并受伤，但是最后还是找回了Joey，在电影中，我们能看到战争给人类带来的伤痛，但是更重要的是我们也能发现人类的闪光点，想知道一匹马和人的友谊吗？来看战马吧！！
BC演的 大爱啊

⑵ 谁能帮我翻译一句英语（速度）

You can write that like this：It is the essential point to teach students，and make them accept ecantion very well.

你的语法问题： 其实就是比较中文话，那个并列句事，要在and前加逗号回。The teacher didn't a teacher不好。你可以说答It is impossible to be a teather ,not to say a good one,even can't let students learn anyting acadamically.其实学英语多看一些东西吧，比较地道有趣。希望对你能有所帮助虽然也不怎么样

⑶ 请帮我翻译一段话。翻译成英文，速度的加分

Good morning/afternoon（以具体情况而定）,everyone. My name is XXX. I'm glad to join you as a member of Class Eight. Miss/Mrs/Mr(以具体情况而定，未婚女老师用Miss，已婚或不知婚姻专状属况的女老师用Mrs，男老师用Mr，后同)Chen is our English teacher, Miss/Mrs/Mr Yang is our Chinese teacher, and Miss/Mrs/Mr Hu teaches us math. I feel happy with them. I believe that our class will be the best and we should have confidence in ourselves.

⑷ 帮忙翻译成英文！速度！谢谢！

* 熟练office文档处理。
*Be experienced in words processing.

* 具备日常英语的听、说、读、写能力。
*Ability in Engish listening ,reading,speaking,writting
* 有弱电施工管理经验，善于内沟通,具有一容定的协调组织能力。
*Electricity construction
management experience , Be good at communication,and get some ablitiy in orgnization
* 爱好 电脑硬件，电影，户外运动。
*abby:hardware of the computer,movie,outdoor

⑸ 跪求中文翻译英文 速度！！

1.Do you remember the thing what I ever told to you?
2.Please forgive me for I just bother you.
3.Keeping early hours is a good habbit.
4.Please try to avoid to making the same mistake.
5.You can wash clothes.
6.I am so sorry for your bicycle was stolen yesterday.
7.My favorite sport is swimming.....- -
8.It is no sense if you go to there today, he must not at home.
9.Did you finished your composition?
10.He came in without any voice.
11.He entered the room without being seen

⑹ 英文翻译

Technology of Submerged Arc Welding
埋弧焊技术
The welding variables for submerged arc welding are similar to the other arc welding processes, with several exceptions. The electrode size is related to the weld joint size and the current recommended for the particular joint. This must also be considered in determining the number of passes or beads for a particular joint. Welds for the same joint dimension can be made with many or few passes; this depends on the weld metal metallurgy desired. Multiple passes are more expensive but usually deposit higher-quality weld metal. The polarity is established initially and is based on whether maximum penetration or maximum deposition rate is required.
埋弧焊技术的焊接变量与其他弧焊工艺的相似。但也有几个例外。电极尺寸与焊缝尺寸以及推荐给特定接头用的电流大小有关。确定特定接头的焊道或焊珠数量时也要考虑电极的尺寸。焊接相同尺寸的接头时，焊道数量可多可少，取决于所需的焊接金属冶金。多焊道的成本更高，但通过会熔覆高质量的焊接金属。极性应在一开始就根据是否需要最大焊透或熔覆率来确定。
The major variables that affect the weld involve heat input and include the welding current, arc voltage, and travel speed. Welding current is the most important. For single-pass welds, the current should be sufficient for the desired penetration without burn-through. The higher the current, the deeper the penetration is. In multi-pass work, the current should be suitable to proce the size of the weld expected in each pass.影响焊接的主要变量包括热输入量、焊接电流、弧焊电压以及焊接速度。其中焊接电流是最主要的变量。对于单焊道焊接来说，电流必须足以使焊接达到所需深度，但不能烧穿。电流越高，焊接越深。对于多焊道作业来说，电流必须适当，从而使每条焊道都获得所需的焊接尺寸。
The arc voltage is varied within narrow limits. It has an influence on the bead width and shape. Higher voltages will cause the bead to be wider and flatter. Extremely high arc voltage can cause cracking. This is because an abnormal amount of flux is melted and excess deoxidizers may be transferred to the weld deposit, lowering its ctility. Higher arc voltage also increases the amount of flux consumed. The low arc voltage proces a stiffer arc that improves penetration, particularly in the bottom of deep grooves. If the voltage is too low, a very marrow bead will result. It will have a high crown, and the slag will be difficult to remove.弧焊电压的变化范围很小。它对焊珠的宽度和形状有所影响。电压越高，焊珠越宽且越平。弧焊电压太高，则会导致开裂。这是因为融化的焊剂量太多，导致过量的去氧剂转移到堆焊上，从而降低了金属的延展性。更高弧焊电压所需要的焊剂也越多。低弧焊电压会产生刚性弧，从而使焊接更深，尤其是在深槽的底部。然而，如果电压过低，形成的焊珠会很窄，并高高隆起。这样会导致焊渣很难清除。
Travel speed has an influence on both bead width and on penetration. Faster speeds proce narrower beads that have less penetration. This can be an advantage for sheet metal welding, where small beads and minimum penetration are required. If speeds are too fast, however ,there is a tendency for undercut and porosity ,since the weld friezes quicker .If the travel speed is too slow, the electrode stays in the weld pool too long, which will create poor bead shape and may cause excessive spatter and flash through the layer of flux.焊接速度对焊珠宽度和焊透深度有影响。速度更快，焊珠更窄，且焊透深度更浅。焊接薄金属板时，速度更快更有利。因为此时需要小焊珠和浅焊透深度。然而如果速度太快，焊料起毛更快，则有可能形成咬边和气孔。如果焊接速度太低，电极在焊接熔池停留时间太长，则会形成不良焊珠、过量飞溅物和焊剂层穿孔。
The secondary variables include the angle of the electrode to the work, the angle of the work itself, the thickness of the flux layer, and, most important , the distance between the current pickup tip and the arc also called electrode stickout. 次要变量包括电极相对于工作台的角度、工作台角度、焊剂层的厚度以及导电嘴和电弧的间距（也称为电极干伸长）。其中电极干伸长是最重要的变量。
The depth of the flux layer must be controlled. If it is too thin, there will be too much arcing through the flux or arc flash. This also may cause porosity. If the flux depth is too heavy, the weld may be narrow and humped. On the subject of flux, too many fines( small particles of flux ) in the flux can cause surface pitting since the gases generated in the weld may not escape. These are sometimes called pock marks on the bead surface.
焊剂层的厚度必须得到控制。如果焊剂层太薄，则会有过量的电弧穿透焊剂或存在电弧闪光。这同样会产生气孔。如果焊剂层太厚，则焊缝可能会太窄且隆起。如果焊剂中存在太多细粉（小颗粒状焊剂），焊接时生成的气体可能无法逸出，从而表面可能会形成点蚀。它们有时被称做焊珠表面的麻面。

⑺ 翻译成英文谢谢速度

I really like English songs, but my English is not too good. I also like to surf the net and make new friends. There's not much else to be said about me, I'm pretty easy-going and laid back. My biggest wish is not to flunk English this semester.

⑻ 英语高手帮忙翻译！求速度，求正确！！

1、直到完成了工作，你才能回家。
util you finish the work, then you will be able to go home, 中文有这样的说法，但英文不会是这样说内的。英文的容说法应该是，you have to finish the work before go home. 你得在回家前完成工作。 而且我看了，以下的句子也都是与时间副词有关的条件语法。
2、回到家后，他休息了一会儿。
He takes a rest after he back home.
3、当春天来临时，到处是鲜花。
bloom every where when spring is coming
4、我一到那里，天就开始下雨。
it starts raining when I arrive there.
5、我们到家的时候天已经黑了。
it was dark when we arrived home.

当……。正……。
注意时态也是有变化，但前后要一致就好， 我上面例子就有，请看一下。

⑼ 速度，英语翻译，在线等~

我来试一下：

亲爱的，我在手机里称你为"亲爱的"，而你却从来不在你的手机里修改我的名字，反正我是从来都没有权利看你的手机。你说你不喜欢进入别人的q-zone，包括我的。所以我不必担心你会看到并嘲笑我糟糕的英语。虽然我的英语很糟糕，但我还是想用英语写这篇日记。
我总是被爱情故事所感动，可能在我的一生当中，爱情是最重要的。你很讨厌我哭，讨厌看见我的眼泪，这我知道。但你也要知道，眼泪是很难忍住的，我平时很坚强，可是面对爱情却很脆弱。我总是想成为你的王后，你的宝贝。想要你疼爱着我，让我毫无烦恼地面对生活。可是现在，对于我来说，所有的事情都变得很难了。你知道吗？我一直都努力尝试为我们俩创造更好的生活，我做的一切都是为了我们俩，为了我们的家庭。我把你当成我最亲密的人而且也想成为你生命中最重要的人，我想聆听你的心声，可是你总是站在离我好远的地方，所以我听不到，我也不知道你究竟爱我有多深。你对我的好似乎是被逼着做出来的，好像不是出自真心的。有时候我真的很失望，你不把我当成你的妻子，你要知道我们将要相互扶持走过一辈子的。我不想和你分开，而我也在学英语，看英语电影，我只想和你在一起，亲爱的，我希望我们的生活是平凡而又甜蜜的，没有伤感，没有争吵。你知道吗，我总是梦到你欺骗我，有时候我甚至这样想，娶了我是你最大的牺牲。而你也可能觉得我要求得太多了，可能你现在只想对我说：闭嘴，不要再说了。你总是想要我安静，你总是留下我一个人，你总是忘记你的承诺而且还不承认曾经许下的诺言。而我又能做什么呢？我只能说：是的，是我弄错了。这或许就是你最想听到的答案吧。时间过得很慢，我不知道生活里还能有什么快乐，或许我现在该做的事就是努力赚钱吧。
那个从前的你，那个爱我和保护我的你，还能回来吗？

⑽ 请帮我把以下英文翻译成中文（速度）

LZ中计了： 谁用机器把中文翻成GP不通的英文、又请你来把这破英语翻成中文了。