機械充填英語怎麼說及英文翻譯

『壹』 機械類英文翻譯～～

電動起錨系纜絞襲盤
Electric anchor winch cable line

液壓絞盤
Hydraulic windlass

液壓起錨機 液壓絞盤
Hydraulic windlass hydraulic windlass

電動液壓起錨絞盤
Electrically operated hydraulic pressure anchor capstan

電動起錨絞盤
Electrically operated anchor capstan

起錨系纜絞盤
Raises anchor the lashing rope capstan

『貳』 機械英語翻譯

清洗：Cleaning
脫臘：burn-on
冶煉：smelting
切割：shearing
洗滌液：cleaning solution
塗鋅 zinc coating
拋丸 ball blast

修型墁刀：slicker
中頻感應爐：intermediate frequency furnace
煮漿版桶：size boiling kettle
調漿桶：size mixing kettle
光譜分析儀權：optical spectrum analyzers

『叄』 求機械專業常用的英語縮寫及其全稱和中文翻譯

PLC是可編程邏輯控制器
額、。。。。。LZ只要單詞縮寫嗎？這個。。。。弄本詞典不是更好？
我快下機了，臨時只能提供幾個。。等等我在發個多一點的吧
現在一下子想起幾個常用的：。。比如：
NC，就是數控
CAD：計算機輔助設計
CAM：計算機輔助製造
CDMA：碼多分址
MDPS:兆比特每秒
AC：交流
DC：直流
AVR：極端電流控制
PT：電壓互感器
LDC：電路補償器
APC：自動功率控制
AM：安培
AOC：自動過載控制
AUS：自動輔助開關
ML：機械損失
GEN：發電機
現在，我一時也就想起這些了，呼呼，我在找找，我也快考試，是機電英語，和你差不多，555。。苦也。。。。。

『肆』 機械英文翻譯

Abstract
The graation project is the subject of radial drilling spindle hole drilling fixture design. This paper in accordance with the general steps fixture design, the design of some of the following:
Through the parts analysis, discussed the components of the machining process, process design and order the type of hair embryo. Part of the analysis through the development of mechanical parts processing line, that the choice of surface processing methods, principles and processing parts of the preparation. Fixture determine the overall plan, including processing methods, targeting programmes and positioning error analysis, clamping programme, cutting clamping force calculations.

Key words fixture design drill-processing technology.

『伍』 求機械專業術語的解釋及英文翻譯

1）電化學腐蝕 electrochemical corrosion
電化學腐蝕就是金屬和電解質組成兩個電極，組成腐蝕原電池。
2）車架 automotive chassis
車架是跨接在汽車前後車橋上的框架式結構，俗稱大梁，是汽車的基體。
3）懸架 suspension
懸架是汽車的車架（或承載式車身）與車橋（或車輪）之間的一切傳力連接裝置的總稱，其作用是傳遞作用在車輪和車架之間的力和力扭，並且緩沖由不平路面傳給車架或車身的沖擊力，並減少由此引起的震動，以保證汽車能平順地行駛。
4） 轉向器 redirector
轉向器的作用是把來自轉向盤的轉向力矩和轉向角進行適當的變換（主要是減速增矩），再輸出給轉向拉桿機構，從而使汽車轉向，所以轉向器本質上就是減速傳動裝置。
5）變速器 speed changer
變速器是用來改變來自發動機的轉速和轉矩的機構，它能固定或分檔改變輸出軸和輸入軸傳動比，又稱變速箱。
6）板料沖壓 sheet metal parts
板料沖壓是利用沖模，使板料產生分離或變形的加工方法。因多數情況下板料無須加熱，故稱冷沖壓，又簡稱冷沖或沖壓。
7）孔加工 spot facing machining
孔加工一般分為鑽孔，鉸孔，擴孔，鏜孔，拉孔。 機床上對孔的加工可以用鑽頭、鏜刀、擴孔鑽頭、鉸刀、拉刀進行鑽孔、鏜孔、擴孔、鉸孔和拉孔。
8） 剛度 rigidity
剛度是指材料或結構在受力時抵抗彈性變形的能力。是材料或結構彈性變形難易程度的表徵。
9）標准件 standard component
標准件是指結構、尺寸、畫法、標記等各個方面已經完全標准化，並由專業廠生產的常用的零（部）件，如螺紋件、鍵、銷、滾動軸承等等。
10） 脆性材料 brittleness material
在外力作用下（如拉伸、 沖擊等）僅產生很小的變形即破壞斷裂的材料。脆性材料在外力作用下（如拉伸、 沖擊等）僅產生很小的變形即破壞斷裂的性質。
11）墊圈 washer
指墊在被連接件與螺母之間的零件。一般為扁平形的金屬環，用來保護被連接件的表面不受螺母擦傷，分散螺母對被連接件的壓力。
12） 塑性變形 plastic distortion
塑性變形是物質-包括流體及固體在一定的條件下，在外力的作用下產生形變，當施加的外力撤除或消失後該物體不能恢復原狀的一種物理現象。

『陸』 關於機械英語翻譯

註：你所給的有兩種語言，我只翻譯其中的英文。

Riapertura di sicurezza/Reversal safety contact反轉安全觸點
Arresto di sicurezza/Stop safety contact停止安全觸點
Passo-passo/Step by step按步驟進行
Finecorsa chiusura/Closing limit-switch關閉限位開關
Finecorsa apertura/Opening limit-switch開啟限位開關

TM:Tempo max.manovra(10-120s)
Max.operating time(10-120s)最大操作時間(10-120s)

TC:Tempo chiusura autom(0-120s)
Automatic closure time(0-120s)自動關閉時間(0-120s）

R1:Spinta sugli ostacoli
Thrust o obstaoles止推O型障礙（不太確定這個）
RF:Reg.forza/Power adjustment功率/力量調整

D1 Funzionamento comando 1-5
Command 1-5 functioning命令1--5功能
off:passo-passo step by step off：按步驟進行
on:Apre Open on:Apre開啟

D2 Selezione senso di apertura
Selection of opening directiao開啟方向選擇
osff:Destra right off:destra右
on:sinistra left on:sinistra左

D3 Rinnovo tempo chiusura autom
Resetting automatic closure time重置自動關閉時間

D4 Stato della porta all'accuensione
Condition of the door when switched on當合閘時，門的狀態：
off:Aperto Open off:Aperto開
On:Chiuso closed on:chiuso關

文中有些專業詞彙查不出來，自己修改下吧，希望能幫到你就行。

『柒』 求助:機械英文翻譯

Modern logistics equipment in computer science and electronic technology on the basis of combining the traditional mechanical disciplines to the development of the integration of mechanical and electrical equipment. From logistics management and control systems, computer network and database technology is used throughout the system to normal operation of the premise. The application of simulation technology so that the logistics system design in a higher level. Logistics has become the basis of concurrent engineering and an integral part of CIMS.
Walk-mainly small hydraulic crane operating system, electrical control system and hydraulic control system consists of three parts. As a car chassis will be working platforms, electrical, hydraulic systems and are installed on the crane above, by a remote control device to control the motor, the hydraulic pump through the motor control and thus control the speed of hydraulic motors and hydraulic cylinder piston speed To achieve the required action. Four hydraulic motor-driven hydraulic pump and hydraulic cylinders in order to achieve the two front wheels of the rotation, the drum rotation, rotation of the turntable, the telescopic crane and the crane's movements, as these institutions are not working at the same time , The largest pump flow from these institutions in the flow of the largest agencies decided. As the motor and pump may not connect on the same axis, between the motor and pump installed on a flexible coupling to eliminate jitter.

參考

『捌』 機械英語的翻譯，誰可以幫忙一下啊，萬分感謝

First, import measurement system categories: USA - West (Sealo1) Corporation, the United States - Flowserve Corporation, USA - Dura company John John Crane International (International) Heavy Instries, the United States -博格瓦納(Borg-wanter) UK -- Crane (Crane Packing), Germany - Bergman (Burgmann) company, Denmark - Grundfos, Sweden - Alfa valve (AFLA), Canada - Pacific & richard Company, Japan - Piranesi company, Japan - carbon Advantech PAC-international sealed Seiko Company, Japan - Eagle (Eagle) company, United Kingdom -弗萊克西box (Flexibox) companies, providing technical advice, sample mapping customization, repair facilities, special services. In ensuring that under the premise of quality, price is only 30% of the import price -40%. Second, pump categories: 101,103,104,105,106,108,109,110,111,114,151,152,156,168,169,1527,1528,523,524,43 type, F type, Type Dalian, Shenyang-based, P-type, GX, GY, EX, EY, FBD, BIA type, M7-series, WM104, WM108, WM208, etc.. Third, reactor type: 201,202,203,204,205,205 A, 211,206,212,2 CW2T, 3J02J, FM-I, M45KL, HSHL-D, VRA, BRO, PACIFIC-560, PACIFIC-582, PACIFIC-583 and so on. Fourth, accessories category: United States DuPont Kalrez 6375/7075 desflurane poly-wide rubber O-ring, the United States GREENE TWEED company CHEMRAZ 505/605 O-ring, fluorine rubber, silicone rubber, oil NBR rubber, all-inclusive fluoride "O" ring seal, bronze PTFE, PTFE V-ring, support ring, gaskets, PTFE gasket kits rubber composites, PTFE silicon carbide, silicon nitride, alumina, chromium oxide , spraying ceramic seal ring. Loaded carbide inserts, carbide sprayed Ni60 surfacing hard seal ring. Baptist antimony carbon graphite seal ring and filled with all kinds of PTFE sealing ring, such as accessories and more than the special-shaped pieces of various materials processing. Shaft above have a variety of specifications, such as 12-150.

『玖』 機械英語翻譯】急機械專業單詞

80 t LF爐短網出廠檢驗書
Delivery Inspection for 80t LF Furnace Short Net
產品名稱
Proct name
LF爐短網
LF furnace short-net
規 格
Specifications
80t 出廠日期
80 t proction date

各 項 技 術 指 標 檢 驗 結 論
Inspection Results of various technical indexes
序號
Serial number
檢驗項目
Inspection items
標准要求
Standard requirements

測 試 結 論
Inspection results

導電橫臂
Conctive cross arm
水冷銅管等
Water-cooled copper pipes
水冷電纜
Water-cooled electric cables
1 外觀、裝配尺寸 按《Q/HTY-002-94》第4．1項規定
Appearance and assembly dimension comply with《Q/HTY-002-94》provision 4.1

2 絕緣電阻（MΩ）在AC500V時≥1MΩ
Insulation resistance (MΩ) ≥1MΩ at AC500V

3 抗電強度 3500V一分鍾無擊穿及飛弧
Dielectric withstanding voltage, no breakdown and flashover within 1minute at 3500v.

4 夾頭夾緊力（KN）
Clamping strength of clamping chuck

5 密封性 水壓≥0.6Mpa時無滲漏
Sealing property, No leakage under ≥0.6Mpa water pressure

6 電極園弧外表面吻合程度 ≤0.20mm
Arc anastomosis of electrode arc』s exterior surface ≤0.20mm

7 安全要求 按《Q/HTY-002-94第4.3項規定》
Safety requirements comply with 《Q/HTY-002-94》provision 43.

附：使用環境條件
Attachment: application environment conditions:
1. 變壓器容量：
Transformer capacity

2. 電極直徑:
Diameter of electrode:

3. 水壓:0.25-0.4Mpa;
Water pressure: 0.25-0.4Mpa;

4. 水質:工業循環水。
Water quality: instrial circulation water

檢 驗 員 (簽字)
Inspector:
技 術 員 (簽字)
Technician:
檢 驗 日 期
Inspection date:

『拾』 機械英語，求翻譯。

三、設備結構：
Three, equipment structure:

機器主要包括如下設備（如圖）
The machine mainly includes the following equipment (pictured)

1.主機（擠出機）
1. The host (extruder)

包括傳動部分、機筒和螺桿、機筒加熱器等組成。
Including the transmission part, barrel and screw, machine tube heater etc.

2.機頭
2. Head

主要由連接器（包括過濾部分）、支管、模頭（膜寬度調節及擠出膜厚度調節）及機頭加熱器等組成。
Mainly by the connector (including filter part), tubes, die (film width adjustment and extrusion film thickness regulation) and head heater etc.

復合機機頭溫度很高，一般為300～350℃。
Compound machine with high temperature, generally for 300 ~ 350 ℃.

3.放卷裝置：
3. The cloth-extending system:

放卷裝置為固定單軸型和固定雙軸型，根據實際情況合理配置。
The cloth-extending system for a single fixed axis type and fixed al axle type, according to the actual situation of the reasonable configuration.

4.復合裝置：
4. Composite device:

復合裝置主要包括兩只硅橡膠壓輥、施壓冷卻鋼輥、冷卻鋼輥、兩只剝離冷卻輥、液壓系統和冷卻循環系統等組成。
Composite device is mainly include two silicon rubber roller, pressure roller, cooling steel cooling steel roller, two stripping cooling roller, hydraulic system and cooling circulation system, etc.

5.切邊裝置：
5. Trimming device:

主要由刀架和刀片組成。
Mainly by the knife blade and composed.

6.卷取或打孔、折邊、裁切裝置。
6. Winding or punching, ruffled, cutting device.

6a. 卷取裝置主要由卷取輥、傳動部分和力矩電機組成。
6 a. Coiling device mainly by the winding roller, transmission parts and torque motor composition.

6b. 打孔、折邊、裁切
6 b, punching, ruffled, cutting

6b.1打孔裝置主要由可以上下移動的打孔針軸和下面固定的氯丁橡膠輥組成。
6 b. 1 holing can move up and down by device is mainly of holing needle axis and the fixed neoprene roller composition.

6b.2折邊裝置主要由內導架和彈性壓條組成。
6 b... 2 ruffled device is mainly by inside the frame and elastic layering composition.

6b.3裁切裝置主要由牽引輥、裁切刀架、刀片、交換齒輪及傳動系統等組成。
6 b. 3 cutting device is mainly by drawing roller, cutting knife, knives, exchange and transmission gear system, etc.