真增塑劑英語怎麼說及英文翻譯

Ⅰ 關於塑料的英文翻譯（需專業）

解答如下：GE Plastics
Generally refers to volume of proction, use wide, forming good, cheap plastic, such as polyethylene, polypropylene, phenolic, etc..
GE Plastics has five varieties, namely, polyethylene, polypropylene, PVC, polystyrene and ABS. They are thermoplastic.
Polyethylene (PE)
Polyethylene is a plastic instry in the most proctive varieties. Polyethylene is opaque or translucent, light crystalline plastics, with excellent low temperature performance (the lowest temperature can reach -70 ~ -100 ℃), electrical insulation, chemical stability, capability of most of the acid-base erosion, but not heat. Polyethylene suitable for use on injection molding, blow molding, extrusion methods such as machining. PE can be classified according to different densities: low density polyethylene LDPE; high density polyethylene HDPE; linear low density polyethylene LLDPE.
Polypropylene (PP)
Polypropylene is a thermoplastic derived from propylene polymerization, usually colorless, translucent solid, odorless non-toxic, a density of 0.90 ~ 0.919 grams / cm, is the lightest of GE Plastics, which highlight the advantages are in the water-resistant cooking characteristics, corrosion resistance, strength, rigidity and transparency better than polyethylene, drawback is poor low-temperature impact resistance, easy to aging, but can be respectively, through modification and adding additives to be improved. Polypropylene proction methods are slurry, Liquid Bulk and Gas Act 3.
Polyvinyl chloride (PVC)
PVC is a polymer derived from vinyl chloride plastics, by adding plasticizers, its hardness can be changed significantly. It is made of hard procts as well as soft procts have a wide range of uses. Methods of proction of PVC suspension polymerization, emulsion polymerization, and bulk polymerization, suspension polymerization in the main.
Polystyrene (PS)
Polystyrene is a versatile polymer of styrene, appearance and transparent, but the shortcomings of brittle hair, therefore, polybutadiene can be made by adding high impact polystyrene (HTPS). The main proction methods of polystyrene bulk polymerization, suspension polymerization and solution polymerization.
ABS
ABS resin is acrylonitrile - butadiene - styrene monomer co-polymerization of three kinds of procts, referred to as ABS terpolymers. The plastic because of its components A (acrylonitrile), B (butadiene) and S (styrene) in the proportion of different composition, as well as differences in manufacturing methods, the nature there are very different. ABS for injection molding and extrusion processing, so its use also mainly the proction of these two types of procts.