牆體尺寸的英語怎麼翻譯
The Leaning Tower of Pisa was built in August 1173 and is the free-standing clock tower of the Cathedral of Pisa, Italy, on the Square of Miracles in the north of Pisa, Tuscany, Italy.
The Leaning Tower of Pisa is 58.36 meters high from the foundation to the top of the tower. It is 55 meters high from the ground to the top of the tower.
The width of the wall of the clock tower is 4.09 meters on the ground, 2.48 meters wide at the top of the tower, and the total weight is about 14453 tons.
The center of gravity is above the foundation. 22.6 meters. The circular foundation has an area of 285 square meters and an average pressure of 497 kPa to the ground.
The angle of inclination is 3.99 degrees, which is 2.5 meters away from the outer edge of the foundation and 4.5 meters from the top.
比薩斜塔建造於1173年8月，是義大利比薩城大教堂的獨立式鍾樓，位於義大利托斯卡納省比薩城北面的奇跡廣場上。
比薩斜塔從地基到塔頂高58.36米，從地面到塔頂高55米，鍾樓牆體在地面上的寬度是4.09米，在塔頂寬2.48米，總重約14453噸，重心在地基上方22.6米處。圓形地基面積為285平方米，對地面的平均壓強為497千帕。傾斜角度3.99度，偏離地基外沿2.5米，頂層突出4.5米。
(1)牆體尺寸的英語怎麼翻譯擴展閱讀
比薩斜塔的建築風格有：
1、比薩斜在發生嚴重的傾斜之前，它大膽的圓形建築設計已經向世人展現了它的獨創性。比薩鍾樓被認為是獨立於原型，在借鑒前人建築經驗的基礎上，獨立設計並對圓形建築加以了發展，形成了獨特的比薩風格。
2、鍾樓的圓形設計被認為是為了同一旁的大教堂建築形成反射而相對應，因此有意地模仿教堂半圓形後殿的曲線設計。
3、鍾樓與廣場上對圓形結構的強調是相一致的，尤其是在宏偉的、同樣是圓形的洗禮堂奠基以後，整個廣場更像是有意設計成耶路撒冷復活教堂的現代版本。這種的設計正來源於經典的古代建築。
4、鍾樓的裝飾格調繼承了大教堂和洗禮堂的經典之作，牆面用大理石或石灰石砌成深淺兩種白色帶，半露方柱的拱門、拱廊中的雕刻大門、長菱形的花格平頂、拱廊上方的牆面對陽光的照射形成光亮面和遮蔭面的強烈反差，給人以鍾樓內的圓柱相當沉重的假象。
B. 土木專業英語翻譯（英翻中）
1 reinforced concrete can be poured into various shapes, such as beams, columns, plates and arches.
2 An important feature of building materials is stiffness.
3 because the thickness of the wall required a large, load-bearing wall structure of the building height restrictions.
4 high-rise buildings of the early development of the framework from the beginning of steel.
希望能幫上你。
C. 麻煩朋友們幫忙將建築裝修說明的文字翻譯成英文
（三）標高及尺寸
1.本設計圖紙標高以米為單位，其他尺寸以毫米為單位。
2.吊頂標高以所在樓層地坪完成面為基準點。
3.當圖紙標注與現場尺寸相矛盾時，以現場尺寸為准，若有較大差異時，施工單位應及時通知設計單位，以便及時調整或變更設計，切忌用比例尺度量圖紙。
（四）防火設計
1.本設計不改變建築設計的防火分區、防火設施，防火門的位置、大小、開啟方向和防火等級。
2.所有隱蔽木作部分須做防腐、防火處理。
3.此次裝修設計不改變原有廠房消防系統。
（五）室內裝飾材料及做法
牆體工程
1.新砌輕質砌塊隔牆
*100厚輕質砌塊隔牆錯縫搭砌，粉刷水泥砂漿，批膩子，面刷白色乳膠漆。
構造和技術要求參見國家標准設計圖集《內裝修-牆面裝修》13J502-1。
2. 局部牆面修復
*針對建築1、2、3樓破損、起皮、霉變的內牆面進行表面鏟除，水泥砂漿找平，重新批膩子，面刷白色乳膠漆。
(C) elevation and size
1. This design drawing elevation in meters, other dimensions in millimeters.
2. Ceiling elevation to the floor where the completion of the floor surface as the base point.
3. When the drawings marked with the size of the field of contradiction, to the size of the scene, if there are large differences, the construction unit shall notify the design unit in time to adjust or change the design, do not use the scale of the amount of drawings.
(4) fire protection design
1. This design does not change the architectural design of the fire district, fire safety facilities, fire doors position, size, direction and fire direction open.
2. All hidden wood parts must be anti-corrosion, fire treatment.
3. The decoration design does not change the original plant fire protection system.
(E) interior decoration materials and practices
Wall Engineering
1. New building block of light block
* 100 thick light block the wrong wall joints dredging, cement mortar whitewash, approved putty, surface paint white latex paint.
Construction and technical requirements see the national standard design atlas "interior decoration - wall decoration" 13J502-1.